Manual Transmitter Search - Steinbach 061340 Mode D'emploi

9. Re-insert the screw
10. Turn the solar light
The outdoor unit can be found on channel 1 of the indoor unit.
Indoor unit
Change the batteries in the indoor unit
the display.
1. Remove the battery compartment cover from the battery compartment
2. Remove the old batteries.
At delivery there are no batteries in the battery compartment.
3. Insert 2 new AAA batteries.
Always exchange all batteries. Never mix batteries with different charge levels. Use
only batteries that are listed in the "Technical Data" section.
4. Close the battery compartment
The display elements of the display appear briefly. The measured indoor temperature is
displayed next to the indoor temperature symbol
approximately 3 minutes while the indoor unit
unit . As soon as the indoor unit receives the signal from the outdoor unit, the
14
temperature measured by the outdoor unit

Manual transmitter search

The indoor unit
1
the event of a signal failure or after a battery change). If the indoor unit is not receiving
the signal from the outdoor unit, 3 horizontal lines ("--.-") are displayed next to the
outdoor temperature symbol
restore the wireless connection, it might be necessary to initiate the transmitter search
manually.
Activating the transmitter search manually
During the transmitter search, place the indoor and outdoor unit
approximately 1.5 m from possible sources of interference (electronic
devices and radio equipment).
1. Press the CH button
The channel display
2. Press and hold the CH button
The signal symbol
of the outdoor unit
24
in the housing (see Fig. C).
19
clockwise to screw it onto the outdoor unit
13
17
occasionally loses the wireless signal of the outdoor unit
instead of the measured temperature. In order to
10
several times to select channel 1.
5
(indoor unit) displays channel 1.
8
5
flashes while the indoor unit
9
.
14
as soon as the battery symbol
1
with the battery compartment cover.
. The signal symbol
12
searches for the signal of the outdoor
1
is displayed.
14
for 3 seconds.
.
14
11
9
searches for the wireless signal
1
appears on
.
17
flashes for
(e.g., in
14