Checking The Delivery For Completeness And Damage; Initial Cleaning Of The Product; Operation - Steinbach 061340 Mode D'emploi

Careless opening of the packaging, especially with the help of sharp
or pointed objects, may cause damage to the product.
- Open the packaging very carefully.
- Do not penetrate the packaging with sharp or pointed objects.
There is a higher risk of damage to the product if it is stored or
transported without the packaging.
- Do not dispose of the packaging.
- In the case of damage, substitute the packaging with an at least
similar box.

Checking the delivery for completeness and damage

1. Open the packaging carefully.
2. Take all parts out of the packaging.
3. Check the completeness of the delivery.
4. Check the delivery for damage.

Initial cleaning of the product

1. Remove the packaging material and all protective foils if present.
2. Clean all parts of the delivery as described in the "Cleaning" section.
The product has been cleaned and prepared for use.

Operation

The product consists of 2 measuring devices:
- Indoor unit
1
- Outdoor unit
The outdoor unit is intended for measuring the temperature in the water (e.g., pool,
pond) while the indoor unit measures the inside temperature in the house.
When you place the outdoor unit into the water, it is recommended that you
secure it with the fastening cord
22
(receiver)
(transmitter).
14
NOTICE!
NOTICE!
.
15