Operation Mode; Turn On/Off; Zeroing; Weighing With Taring - KERN RPB D Série Mode D'emploi

7 Operation Mode

7.1 Turn on/off

 To turn on/off confirm forward at the underneath on the right of the scale and
keep pressed for a little while. The balance will carry out a self-test. As soon as
the weight display shows "0" in all the three display windows your balance is
ready to weigh.
 To switch-off push backward the switch-on/switch-out on the right lower side of
the balance.

7.2 Zeroing

Resetting to zero corrects the influence of light soiling on the weighing plate.
 Unload the balance
 Press
, the balance starts resetting to zero.
The indicator [] above

7.3 Weighing with taring

 Deposit weighing vessel. After successful stop check press the
display and the indicator [] above [NET] appear.
 Weigh the material, the net weight will be indicated.
 The weight of the weighing container will be displayed as a minus number after
removing the weighing container.
 To delete the TARE value unload the weighing plate and press
[] above [GROSS] appears.

7.4 Overload warning

Overloading exceeding the stated maximum load (max) of the balance, minus a
possibly existing tare load, must be strictly avoided. This could cause damage to
the balance.
Exceeding maximum load is indicated by the display of "„-OL-", and an audio
sound. Unload balance or reduce preload.
22
appears.
button. Zero
, the indicator
RPB_D-BA-e-1726