Reset Of All Settings; Reset Of A Single Setting - Geberit HyTronic Service-Handy Mode D'emploi

HyTronic Service Handy, Bidirectional
Operation

Reset of all settings

All settings are restored to factory settings.
Prerequisites
• Control is installed correctly and operating
• Contact with a control is established. See "Querying
and changing settings"
The command to reset cannot be reversed
1 Go to menu item [FactrySet] [Werkeinst] and
press "OK". The number of the menu item can be
found in the operating instructions of the control.
22 ResetSens
23 FactrySet
24 CleanMode
30 MainProgr
2
The following information is displayed
22 ResetSens
23 FactrySet
24 CleanMode
3
Press button "R"
22 ResetSens
23 FactrySet
24 CleanMode
4 Confirm with "OK". Command to reset is
transmitted to control. The following information is
displayed
GEBERIT
00 Bidirect
08 Unidirect
Settings
Result
Settings are now set to factory settings.
20
22 ResetSens
23 Werkeinst
24 Reinigung
30 Hauptmenü
22 ResetSens
23 Werkeinst
R?
24 Reinigung
22 ResetSens
23 Werkeinst
OK? OK?
24 Reinigung
GEBERIT
00 Bidirekt
08 Unidirekt
Einstellung

Reset of a single setting

A single setting is restored to factory setting.
Prerequisites
• Control is installed correctly and operating
• Contact with a control is established, see "Querying
and changing settings"
The command to reset cannot be reversed
1 Go to desired menu item and press "OK" (in the
example [IntervalT] [IntervalZ])
41
42 IntervalT
2
Press button "R"
41
42 IntervalT
R?
Reset OK?
3 Press "OK". Setting is set to factory setting. New
value is displayed
41
42 IntervalT
Press "Esc" to close menu item
4
End contact. Go to menu item [Ctrl OFF] [AUS]
and press "OK" twice
00
01
02
03
The following information is displayed:
GEBERIT
00
08 Unidirect
Result
The setting is now set to factory setting.
IntFlshT 41 IntervSpZ
42 IntervalZ
10
IntFlshT 41 IntervSpZ
42 IntervalZ
10
Reset OK?
IntFlshT 41 IntervSpZ
42 IntervalZ
168
Ctrl ON 00
Ctrl OFF 01
Command 02
Program 03
GEBERIT
Bidirect 00 Bidirekt
08 Unidirekt
Settings Einstellung
10
10
168
EIN
AUS
Befehle
Program