GoPro HERO4 BLACK Manuel De L'utilisateur page 70

/ Multi-Shot Mode
CAPTURING BURST PHOTOS
1. Select Burst mode:
a. Press the Power/Mode button [
to Multi-Shot mode.
b. Press the Settings/Tag button [
c. Press the Shutter/Select button [
get to Burst.
d. Press the Settings/Tag button [
menu. The Burst icon [
camera status screen.
2. Press the Shutter/Select button [
lash and the camera beeps multiple times.
See Rate in this section for options available for Burst photos.
42
] repeatedly until you get
] to open the settings menu.
] repeatedly until you
] to close the settings
] appears in the upper let on your
]. The camera status lights
CAPTURING TIME LAPSE OR NIGHT LAPSE PHOTOS
1. Select the desired multi-shot capture mode (Time Lapse or
Night Lapse):
a. Press the Power/Mode button [
to Multi-Shot mode.
b. Press the Settings/Tag button [
c. Press the Shutter/Select button [
to the desired capture mode (Time Lapse or Night Lapse).
d. Press the Settings/Tag button [
menu. The icon for the selected capture mode appears in the
upper let on your camera status screen.
2. Press the Shutter/Select button [
countdown and the camera status lights lash each time a photo
is captured.
3. To stop capturing, press the Shutter/Select button [
camera status lights lash three times and the camera beeps
three times.
PRO TIP: When the camera is of and QuikCapture is enabled, you
can turn the camera on and immediately begin capturing Time Lapse
photos just by pressing and holding the Shutter/Select button [
Press again to stop recording and power of the camera. For details,
see Setup Mode.
/ Multi-Shot Mode
] repeatedly until you get
] to open the settings menu.
] repeatedly until you get
] to close the settings
]. The camera initiates
]. The
].
43