/ Video Mode
Video mode contains four capture modes: Video, Time Lapse Video,
Video + Photo and Video Looping.
Capture Mode
Description
Video (default)
Captures video.
Creates video from frames captured at
speciic intervals. Time Lapse Video is
available only in 4K and 2.7K 4:3 resolutions.
Time Lapse Video
Time Lapse Video is captured without audio.
Protune
™
not available in this capture mode.
Simultaneously captures both video and
photos. You can set the camera to capture a
Video + Photo
photo at selected intervals while you record
video. For details, see Video + Photo Intervals
in this section.
Lets you continuously record and save only
the best moments, which helps to conserve
space on your microSD card. You must
Looping
select an interval. Protune is not available in
this capture mode.
Note: Looping is not available in high-performance video modes.
20
, Auto Low Light, and Spot Meter are
CAPTURING VIDEO
1. Press the Power/Mode button [
Video mode.
2. If necessary, select a diferent video capture mode (Video, Time
Lapse Video, Video + Photo, or Video Looping):
a. Press the Settings/Tag button [
b. Press the Shutter/Select button [
to the desired capture mode.
c. Press the Settings/Tag button [
menu. The icon for the selected capture mode appears in the
upper let on your camera status screen.
3. Press the Shutter/Select button [
and the camera status lights lash while the camera is recording.
4. To stop capturing, press the Shutter/Select button [
status lights lash three times and the camera beeps three times.
If the memory card is full or the battery is out of power, your camera
automatically stops recording. Your video is saved before the camera
powers of.
PRO TIP: When the camera is of and QuikCapture is enabled, you
can turn the camera on and immediately begin capturing video just
by pressing the Shutter/Select button [
recording and power of the camera. For details, see Setup Mode.
/ Video Mode
] repeatedly until you get to
] to open the settings menu.
] repeatedly until you get
] to close the settings
]. The camera beeps once
]. The camera
]. Press again to stop
21