General; Local Value Of The Assembly/Operating Manual; Intended Use; Improper Use - Actiforce STEELFORCE PRO SLS 2 STEP Série Notice De Montage

1 General

1.1 Local value of the assembly/Operating Manual

The guiding principle for safe use and trouble-free operation of this workstation frame is knowledge of
basic safety information and regulations. This assembly/operating manual contains the most important
information needed for assembling and operating the workstation frame safely. This assembly/
operating manual, in particular the safety information contained herein, must be observed by any
person building the frame and working on the finished surface. More importantly, the rules and regula-
tions applying to accident prevention in the locality in which the workstation frame is to be used must
be observed at all times.

1.2 Intended use

The workstation frame must be used only as a height-adjustable workstation for sitting/standing use in
offices or other enclosed areas. The frame must be used for this purpose only. Any other use than the
above shall be deemed improper. The manufacturer can in no way be held liable for damage arising
from improper use. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and under-
stand the hazards involved. Children should be supervised to ensure that they do not play with the
appliance, cleaning and user maintenance shall not be made by children without supervision.
Intended use shall also include:
 Observation of all information from the assembly/operating manual and
 Prohibition of any sort of addition to/conversion of the workstation.

1.3 Improper use

 Never use the workstation frame to lift people or loads.
 Do not exceed the maximum load of the workstation frame.
 Operate workstation only with power supply unit which is included in delivery.
1.4 Grounding Instruction (System with SMART/COMPACT Controller)
This workstation frame must be grounded. Connect this workstation frame
to a properly grounded outlet only. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to re-
duce the risk of electric shock. This workstation frame is equipped with a
cord having a grounding plug like the plug illustrated in Figure 1. The plug
must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
This appliance incorporates an earth connection for functional purposes only.
For protective earth, the terminal is intended to connect with equipotential bonding of building
where the workstation frame is being setup. Terminals for the connection of external equipotential
bonding conductors shall allow the connection of conductors having nominal cross-sectional areas of
2,5 mm to 6 mm
2 2
.

1.5 Danger

Improper connection of the workstation frame grounding conductor can result in a risk of electric
shock. Check with a qualified electrician if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product.
If the supply cord is damaged, it must be replaced by a special cord or assembly available from the
manufacturer or its service agent.
WARNING: Any changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
English
6