Operation And Indicators; Indicators; Troubleshooting - Actiforce STEELFORCE PRO SLS 2 STEP Série Notice De Montage

6 Operation and Indicators

Observe the provisions of Section 2, Safety Information on page 8, in particular:
Do not leave children unsupervised with the workstation frame. Children may be un-
aware of the dangers presented by the workstation frame. They would be in serious
danger of injuring themselves, possibly even with fatal consequences.
Do not exceed the maximum time lag of the workstation frame. Make sure there is
ample space to avoid collisions if there are objects on the work surface such as
computers or computer peripherals.

6.1 Indicators

Leave the immediate surroundings of the workstation frame at once if it starts to
move spontaneously. Under no circumstances attempt to operate the workstation
frame.
Stop using the workstation frame at once if you notice anything unusual (strange
sounds, smoke, etc.).
Have the workstation frame repaired by specialists. Refrain from using the workstation
frame until it has been successfully repaired.
Stop using the workstation frame at once if its safety features fail to work as they
should.

7 Troubleshooting

Problem
Height adjustment does not
work.
Height adjustment does not
work.
Height adjustment does not
work.
If your problem couldn´t be solved or is not listed here, please contact your customer
service for further advise.
Possible cause
Cables or connectors defective.
If cables and connectors have
been checked a possible cause
could be a defective up-down
switch.
Error in power supply.
Solution
Check cables for damages
and if necessary
them. Power in order?
Replace up-down switch.
Initialize reboot.
English
replace
30