Philips AJ 3010 Mode D'emploi page 8

XP AJ3010/00 20-06-2000 16:33
1. During the alarm call,
press REPEAT ALARM /
™ The selected alarm indicator flashing during a repeat
alarm.
2. Repeat if desired.
SLEEP
About SLEEP
This set has a built-in sleep timer which enables the set to be
automatically switched off during radio playback after a set
period of time. There are four sleep times before the set turns
itself off: 60, 30, 15 minutes and off.
Setting SLEEP
1. Press SLEEP / RADIO ON to switch on the radio.
2. Within 1 second, press SLEEP / RADIO ON again once or
more to select your sleep time.
™ Display shows in sequence:
time options: SL : 60, SL : 30, SL : 15 and
3. To cancel sleep, press either:
– ALARM RESET / RADIO OFF
– REPEAT ALARM /
BRIGHTNESS CONTROL
– SLEEP / RADIO ON once or more until
from the display.
8
Pagina 8
.
BRIGHTNESS CONTROL
and the sleep period
SLEEP
.
OFF
disappears
SLEEP
MAINTENANCE
• If you do not intend to use the set for a long time,
withdraw the mains plug from the wall outlet and remove
the backup batteries.
• Do not expose the set to humidity, rain, sand or excessive
heat caused by heating equipment or direct sunlight.
• To clean the set, use a soft, slightly dampened chamois
leather. Do not use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may harm the
housing.