Télécharger Imprimer la page

Bontempi Toy Band Star 10 3000 Manuel D'instructions page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
E N G L I S H
MAINS SUPPLY
The instrument can be supplied by the AC/DC (Vdc =6V
/ I = 300 mA)
supplied) conforms to national and international safety
regulations covering electrical appliances. Insert the
jack in the DC 6V socket.
• The toy is not intended for children under 3 years old • The toy
must only be used with the recommended adaptor • The toy is
to be disconnected from the adaptor before cleaning • The
mains adaptor is NOT a toy.
BATTERY SUPPLY
Open the battery
compartment. Insert
4 x 1,5V batteries
R6/AA
(not inclu-
ded). Re-fit battery
cover.
Replace
batteries
when the quality of sound becomes bad. Use alkaline
batteries to obtain a longer duration.
ATTENTION – BATTERY CARE
• Non-rechargeable batteries are not to be recharged. •
Rechargeable batteries must be removed from the toy before
being charged. • Rechargeable batteries are only to be charged
under adult supervision. • Different types of batteries or new
and old batteries are not to be mixed. • Use only batteries of the
same or equivalent type. • Batteries are to be inserted with
correct polarity. • Remove exhausted batteries to prevent lea-
kage. • Do not short-circuit supply terminals. • Remove batteri-
es during long periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned
here below, please refer to Council Administration office regar-
ding specialised waste collection centres.
1. DISPOSAL OF BATTERIES:
Protect the environment by disposing of
batteries in the special containers provided
for this use.
2. PACKAGING DISPOSAL:
Take the paper, cardboard and corrugated board to the appro-
priate waste collection centres. Plastic material must be placed
in the relevant collection containers.
2
positive central adapter (not
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
R6/AA 1.5V
The symbols indicating the various types of plastic are:
01
02
03
PET
PE
PVC
Key for the different types of plastic materials:
PET = Polyethylene terephtalate • PE = Polyethylene, code 02
for PE-HD, 04 for PE-LD • PVC =Polyvinyl chloride • PP =
Polypropylene • PS = Polystyrene, Polystyrene foam • O = Other
polymers (ABS, Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES
The wheelie bin symbol with a cross indicates
that the product must not be disposed of in the
domestic waste at the end of its useful life.
Instead, it should be taken to your nearest desi-
gnated collection point or recycling facility.
Alternatively, check with your retailer and return
the product when buying a replacement, on a one-to-one
basis or as free of charge in case the size is smaller than 25 cm.
Appropriate disposal promotes the recycling of parts and
materials, as well as helping to protect the environment and
human health. Under current legislation, strict penalties are
enforced against those disposing of products illegally. For
more information about the collection of special waste, con-
tact your Local Authority.
SWITCHING ON/OFF
To switch on the instrument move selector
switch off move the same selector to
DEMOSONGS
22 demosongs
This keyboard has
recorded tracks, press the
DEMO ALL
cession. Press
songs in sequence.
n
STOP
Press
to interrupt.
VOLUME CONTROL
Adjust volume to desired level by using the
VOLUME –
button to increase or
SOUND SELECTIONS
You can select one of the
e
related button
.
RHYTHMS SELECTIONS
You can select one of the
r
related buttons
. Press the
increase ( ) or reduce (
n
STOP
to interrupt.
05
06
07
PP
PS
O
k
ON
to
OFF
.
. To choose the pre-
i
DEMO ONE
key
in suc-
j
, to listen to the 22 demo-
VOLUME
b
to reduce
.
4 sounds
by pressing the
4 rhythms
by pressing the
a
TEMPO
buttons
) the rhythm speed. Press
. To
to

Publicité

loading

Ce manuel est également adapté pour:

Toy band star 10 3072