Cherry MW 2310 2.0 Mode D'emploi page 12

64410047-00_DE-EN-FR-ES-IT_MW2310_2-0.fm Seite 12 Freitag, 9. November 2018 9:13 09
CAUTION: Danger of explosions
due to incorrect or incorrectly
inserted battery
• Only use batteries of the type named in
the Technical Data.
• Insert the batteries in accordance with
the markings (+/-) in the battery
compartment.
3 Adjusting the sensitivity
of the mouse
(dpi number)
You can change the resolution of the mouse
sensor between 1000, 1600 and 2400 dpi for
precise work. This changes the speed of the
mouse pointer.
• Press the + and – button on the top of the
mouse.
12
The LED lights up depending on the
setting:
Red = 1000 dpi (factory setting)
Green = 1600 dpi
Orange = 2400 dpi
4 Switching off the mouse
The mouse switches to energy-saving mode
if it is not moved for 0.2 seconds. It detects
any movement and does not need to be
switched on again.
However, it still consumes power in the
energy-saving mode, therefore you should
switch it off manually for longer periods of
disuse or for transporting.
5 Tips
5.1 Adjusting the weight
The mouse can be run on one or two
batteries. This offers you the advantage of
being able to carry on working even if only
one battery is available, or adjusting the
weight of the mouse.