Using the RS headphone system
Switching on the audio source
4
Switch on the audio source. The transmitter automatically
switches on and off together with the audio source. The
ON/OFF
LED lights up green.
Switching on the headphones/adjusting the volume
5
First, set the volume on the headphones to a low level.
Switch on the headphones and set the volume to the
desired level.
Switch off the headphones after use to save battery power.
Optimizing the reception
6
Adjust the receiver channel with the
headphones.
However, if reception is subject to interference:
Change the transmission channel by setting the switch
at the bottom of the transmitter to another position and
re-adjust the receiver channel with the
the headphones. Some electronic devices (e.g. televisi-
ons) can cause interference to your wireless headphone
system. If this happens, increase the distance between
the transmitter and the interference source.
Specifications and
Frequently Asked Questions (FAQs)
Visit our website at www.sennheiser.com.
TUNE
control on the
TUNE
control on
3