Alecto BW-80 Mode D'emploi page 13

7. The time it needs to warm up the milk or the food depends on the quantity and
on the temperature the mik or food has before heating up. (room temperature
or coming from fridge).
8. Stir the contents of the bottle or pot frequently for more rapid distribution of
heat.
9. After a few minutes the food will have reached just the right temperature for
your baby. Remove the bottle or pot from the container, turn the control knob to
'OFF' and disconnect the bottle warmer from the mains.
Check the temperature of the contents on the back of the hand fi rst before feeding
it to the baby, to ensure that the temperature of the bottle contents are safe for
your baby. If the temperature is too hot, use less water in the inside of the bottle
warmer. In case the temperature is too low, use more water.
Do not use while driving, please put the car aside the road but keep the engine
running (high power consumption of 7.5A). Only use the included 12V adapter
because this adapter is designed for this product.
USAGE IN THE CAR
13