Manual adjustment
Electronic adjustment
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Press and hold function buttons (B)
and (C) at the same time until the indi-
cators above function buttons (A), (B)
and (C) flash.
4. Press function button (A).
FILLING THE SALT CONTAINER
Turn the water hardness dial to the posi-
tion 1 or 2.
• The indicators above function but-
tons (B) and (C) go off.
• The indicator above function button
(A) continues to flash.
• The display shows the setting of the
water softener. Example:
el 5.
5. Press function button (A) again and
again to change the setting.
6. Deactivate the appliance to confirm.
CAUTION!
Only use dishwasher salt. Other
products can cause damage to
the appliance.
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it, af-
ter you fill the salt container, start
a programme.
1.
Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt contain-
er (only for the first time).
3.
Fill the salt container with dishwasher
salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap clockwise to close the
salt container.
ENGLISH
31
= lev-