Silhouette Select DIM3225BLSST Guide D'utilisation Et Soins De Propriètaire page 9

SETTING THE TEMPERATURE
CONTROLS
1. Please insure the water pipe is well connected to the
ice maker and keep the switch open.The factory setting
of the ice maker is set to make medium ice, if you need
to revise the ice size, you can press buttons
the relevant Indicator light
Large
Small Med
will open.
2. If you want to stop making ice, please press
button for about 3 seconds, all the indicator lights
will go off and indicator
light will keep on flashing. If you want to return to
making ice, you only need to press the button one
more time.
DOOR REVERSAL
INSTRUCTIONS
This appliance has the capability of the door opening from
either the left or the right side. The unit is delivered to you
with the door opening from the left side. Should you desire
to reverse the opening direction, please follow
these instructions.
Fig. A
A
1 2
Fig. C
C
OPERATING INSTRUCTIONS
3 4
Fig. D
D
5
6
7
ICE BOX
Your ice box is designed to be easily taken out, if you
want to take it out. Lift up the front part of the box then
simply pull it out. (see picture below)
On / Off
Fig. B
B
5
Fig. E
8
7
1. Screws
2. Bottom hinge (Right)
3. Door axis
4 4. Door
5. Top hinge (Right)
6. Lock screws
7. Top hinge (Left)
8. Bottom hinge (Left)
E