Care And Maintenance - Silhouette Select DIM3225BLSST Guide D'utilisation Et Soins De Propriètaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connecting Ice Maker To Water Supply (cont)
Drain-pipe Connection
• If you choose direct drainage or force drainage
mode,you need to buy the external drain pipe
yourself,the connection instruction is as below: Connect
one side of the external drain pipe linker to the outlet
pipe of ice macker,the other side is put into the drain
hole. (see Fig B.)
CLEANING YOUR ICE MAKER
• Turn off the power, unplug the appliance, and remove all
items including shelves and rack.
• Wash the inside surfaces with a warm water and baking
soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
• Wash the Ice box with a mild detergent solution.
• Wring excess water out of the sponge or cloth when
cleaning area of the controls, or any electrical parts.
• Wash the outside cabinet with warm water and mild
liquid detergent. Rinse well and wipe dry with a clean
soft cloth.
POWER FAILURE
• Most power failures are corrected within a few hours and
should not affect the temperature of your appliance if you
minimize the number of times the door is opened. If the
power is going to be off for a longer period of time, you
need to take the proper steps to protect your contents.
VACATION TIME
• Short vacations: Leave the Ice Maker operating during
vacations of less than three weeks.
• Long vacations: If the appliance will not be used for
several months, remove all items and turn off the
appliance. Clean and dry the interior thoroughly. To
prevent odor and mold growth, leave the door open
slightly: blocking it open if necessary.
OPERATING INSTRUCTIONS

CARE AND MAINTENANCE

Fig B.
Furrele (sleeve)
Brass Compression
Nut
Tubing
MOVING YOUR ICE MAKER
• Remove all items.
• Securely tape down all loose items (shelves) inside your
appliance.
• Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Be sure the appliance stays secure in the upright
position during transportation. Also protect outside of
appliance with a blanket, or similar item.
• The Ice Maker should be located in the coolest area of
the room, away from heat producing appliances, and out
of the direct sunlight.
11

Publicité

Table des Matières
loading

Table des Matières