E.zicom e.ziclean Vac100 Guide De L'utilisateur page 22

E.ziclean vac100 by E.zicom
Manuel utilisateur – User Manual
If the LED screen on cleaner has the error information above, please see the
solution as follows:
N° D'ERREUR SIGNIFICATION
0 Foreign body in the left wheel, excessive
load
1 Foreign body in the right wheel, excessive
load
2 Excessive load on the main brush
3 Excessive load on the suction fan
4 Too hight temperature of the battery
5 Left wheel failure or blockage
6 Right wheel failure or blockage
7 Front wheel blocked
8 Left wheel being lifted
A Right wheel being lifted
E F 10 11 12 Cleaner being blocked on the stairs or
13 14 15 16 being lifted unexpectedly
17 18 19 Front bumper blocked
5 1D 1E Too high temperature of the brushes of
wheels engines
E.ziclean vac100 by E.zicom
Manuel utilisateur – User Manual
SOLUTIONS
Check the left wheel and
remove the foreign body
heck the right wheel and
remove the foreign body
Check the main brush and
remove any foreign body.
This robot is not
recommended to be used on
a long wool carpet
Clean the filters
Pause the operation of the
robot and let it resume once
battery cooler
Check the wheel and remove
any foreign body
Check the wheel and remove
any foreign body
Check the front wheel status
Check the wheel and remove
any obstacle
Check the wheel and remove
any obstacle
Check the cleaner status
and clean its sensors
Check the front bumper
Check the wheels for any
foreign body and check the
main brush for any yam