E.zicom e.ziclean Vac100 Guide De L'utilisateur page 14

E.ziclean vac100 by E.zicom
Manuel utilisateur – User Manual
2. Name of your e.ziclean vac100 parts:
E.ziclean vac100 by E.zicom
Manuel utilisateur – User Manual
3. Cleaning preparation
Installation of the Charging Dock station
1. Place the charging dock station on level ground with the back against the wall.
2. Make sure that no obstacle and uneven ground in the area within 3 meters in front of
the base and 0.5m respectively on the left and right of it.
3. Ensure that IR sending window on the base is clean without dust or something else
covered, otherwise, the function of self-charging will be influenced
4. Connect the output plug of the adapter to the Power socket of the Dock Station.
5. Tidy up the electric wire along the wall to avoid obstructing the operation of the Robot.
4. Installation and dissasembly of the mopping parts
•
Attach the enclosed mopping rag to the mopping holder
•
Align the protruding fastener at end of the holder to the sunken positions on the
inner sides of the 2 wheels and press them down. Then both ends of holder will
be locked
•
After installing the mopping rag, mopping can be done while sweeping and
vacuuming, the cleaning effect will be better
•
After using, just pull the holder out
•
It's recommended to wash and twist dry the mopping cloth before using the
mopping function