Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
WARNING:
Cleaning the perimeter extraction panel
Removal:
Pull the panel (FRONT) firmly downwards.
Cleaning:
Clean the extraction panel as often as the grease filter.
The steel of the extraction panel has iXelium surface treatment.
To clean it, proceed as follows:
• Use a soft cloth (preferably microfiber) soaked with water or with a normal glass cleaner.
• Do not use paper towels, as they may leave marks and bits of paper on the panel.
• Do not use abrasive, corrosive or chlorine-based products, or steel wool.
• Do not use steam equipment.
• Do not use flammable products.
• Do not leave acid or alkaline substances such as vinegar, mustard, salt, sugar or lemon juice on the panel.
DO NOT USE ALCOHOL!
Fitting:
The panel must be fixed at the front, in the special pins on the hood surface.
IMPORTANT: Always make sure the panel is firmly fixed in place.
DESCRIPTION AND USE OF HOOD
1. Control panel.
2. Grease filter.
3. Lamps.
4. Telescopic flue.
5. Perimeter extraction panel.
Control panel
1. Motor ON/OFF
2. Speed selection (increase/decrease)
Indicator lights:
a. running at minimum extraction speed
b. running at medium extraction speed
c. running at maximum extraction speed
d. running at intensive extraction speed
NB = the intensive extraction speed is timed for 5 minutes, after which the motor will revert to medium speed.
3. Light ON/OFF
NB = control backlighting brightness increases when the function is in use.
- Disconnect the appliance from the power supply.
a
b
GB14
5
2
1
c
d
3
Publicité
