Training Mode - FujiFilm SonoSite P11 Série Guide D'utilisation

Figure 1-2 Virtual needle image and depth (lower-right corner of the display) on an ultrasound system
5 Follow the instructions in the AxoTrack I Sterile Procedure Kit: Instructions for Use to insert the needle to the
desired target and complete the procedure.
If the image quality is not adequate, review the instructions in the AxoTrack I Sterile Procedure Kit: Instructions
for Use to confirm the correct assembly and alignment of the kit components.
Note Maintain the magnet in contact with the magnet rail. Movement of the magnet
away from the rail will cause the virtual needle to disappear from the display.

Training mode

To set up training mode
1 Press the PATIENT key.
2 Select New/End.
3 Type @AXOTRACK in the Last Name field.
Training mode 7