Sangean PR-D8 Mode D'emploi page 8

Using the Supplied AC Power Adapter
The supplied AC adapter is 9 Volts DC output 700 mA center
pin positive.
1. Insert the AC power adapter plug into the DC-In jack on the left
hand side of the radio.
2. Plug in the AC power adapter into a standard 13A main
socket outlet.
Whenever the AC power adapter is plugged in to the radio and
to the main AC outlet, the batteries are automatically disabled.
The AC adapter should be disconnected from the main AC outlet,
when the radio is not in used.
Setting the Clock
1. Clock can be set in both ways; radio power must be on or off.
2. The display will show "- : - -" when the batteries are installed or
when the radio is plugged in to a main AC outlet.
3. Press and hold the time set button
set symbol and also the year digit followed by a beep.
4. Press tuning up/down button to set required year.
5. Follow the above procedure step to set the month, date,
hour and minute.
6. LCD display will stop flashing and will display the real time when
it's completed.
7
until LCD flashes the time