Use According To Intended Purpose; Residual Risks; Safety Instructions; General Safety Information - Mafell MAF02231/a Traduction De La Notice D'emploi Originale

2.5 Use according to intended purpose

In accordance with its intended use, the guiding
device is suitable for the sawing of wood and panel
materials. Precise and neat cuts, especially angular
cuts, can be made with the guiding device. After the
sawing process, the machine automatically returns to
home position.
The machine used with the guiding device must only
be used by instructed persons or competent persons.
Any other use than described above is not
permissible. The manufacturer cannot be held liable
for any damage arising from such other use.

2.6 Residual risks

Danger
Even if used in accordance with its
intended purpose and despite
conforming with the safety
instructions, residual risks caused
by the intended use will always
remain.
- Touching the insertion tool in the vicinity of the
starting aperture below the base plate.
- Touching the part of the insertion tool that
protrudes below the workpiece when cutting.
- Touching of rotating parts from the side: Insertion
tool, clamping flange and flange screw.
- Machine backlash if the blade gets stuck in the
workpiece.
- Breakage and hurling out of the insertion tool or
parts of the insertion tool.
- Touching live parts with the housing open and the
mains plug or the rechargeable battery not
disconnected.
- Hearing can be impaired when working for long
periods without ear protectors.
- Emission of harmful wood dusts during longer
operation without extraction.
3

Safety instructions

3.1 General safety information

Danger
Always observe the following safety
instructions and the safety
regulations applicable in the
respective country of use!
- Disconnect the plug from the socket and/or
remove the rechargeable battery before making
any adjustments on the machine used with the
guiding device. An unintentional start of the
machine can lead to an accident.
- Securely attach the machine to the guiding
device before using it. A slipping of the machine
on the guiding device can lead to a loss of control
over the machine.
- Place the guiding device on a firm, level and
horizontal surface. If the guiding device slips or
wobbles, the machine used with the guiding device
cannot be guided evenly and safely.
- Always hold the machine used with the guiding
device with both hands on the handles provided for
this purpose. This is a prerequisite for precise and
safe working.
- Before each use, check the function of the
guiding device and check that all warnings are
attached and legible as they were when
delivered. If the warning notices on the guiding
device are missing, this can lead to an increased
risk of injury.
- When processing with connected guiding
device, the machine may only be removed from
the workpiece when it is in home position and
the retractable saw guard is closed. An
unprotected, trailing insertion tool can cause injury.
-11-