Omron WheezeScan HWZ-1000T-E Mode D'emploi page 6

Masquer les pouces Voir aussi pour WheezeScan HWZ-1000T-E:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
Important Safety Information
• This device does not have a waterproof structure. Contact customer support
immediately if the device is exposed to or submerged in water.
• Contact customer support if the device receives a strong shock such as being dropped.
• During operation, make sure that no mobile device or any other electrical device that
emits electromagnetic fields is within 30 cm of this device. This may result in incorrect
operation of the device and/or cause an inaccurate indication.
• DO NOT use this device with other medical electrical (ME) equipment simultaneously.
This may result in incorrect operation of the device and/or cause an inaccurate indication.
• Ensure that this device has acclimated to room temperature before taking a
measurement. Taking a measurement after an extreme temperature change could
lead to an inaccurate indication. OMRON recommends waiting for approximately
2 hours for the monitor to warm up or cool down when the device is used in an
environment within the temperature specified as operating conditions after it is
stored either at the maximum or at the minimum storage temperature. For additional
information on operating and storage/transport temperatures, refer to section 7.
• Read and follow the "Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)" in section 9 when disposing of the device and any used accessories.
• DO NOT keep touching the sound sensor for more than 1 minute.
Unusable Environment
• This device cannot be used in an environment with noise at 60 dB or above, such as:
- near working vacuum cleaners, hair dryers or washing machines
- in moving vehicles
- in noisy public or private areas
In any of these places, an error may occur while taking a measurement.
Data Transmission
• DO NOT replace batteries while readings are being transferred to your smart device.
This may result in incorrect operation of this device and failure to transfer readings.
Battery Handling and Usage
• DO NOT insert batteries with their polarities incorrectly aligned.
• ONLY use 2 "AAA" alkaline batteries with this device. DO NOT use other types of
batteries. DO NOT use new and used batteries together.
• Remove batteries if this device will not be used for a long period of time.
EN5

Publicité

Table des Matières
loading

Table des Matières