Baninni Room Série Mode D'emploi page 8

EN
MONA- BNBT021
IMPORTANT
Retain this manual for future reference
Read the instructions carefully
1. ASSEMBLY OF THE TRAVEL COT
1. Remove the cot from the storage bag (FIG.1). Place the cot on the floor and undo the
straps to open (FIG.2). Put the mattress aside.
2. First, pull the short edges into position with both hands. Second, pull the long edges
into position (FIG.3). Leave the bottom in an upright position.
3. Gently push the bottom down until it's flat and stable (FIG.4).
Important: to prevent the edges from collapsing, make sure they are firmly locked in by
pressing them down gently. If they collapse, pull the bottom up about 50 cm and push
the edge into locked position (FIG.5).
4. Place the mattress in the cot and press it down to ensure a good attachment (FIG.6).
5. Push the brake downwards with your hand or foot to block the wheel (FIG.7).
travel cot mattress