Shock Steam; Vertical Steam - Beko SPM7128P Mode D'emploi

Operation
3
3. After the thermostat indicator
light (11) switches off press the
steam trigger (10).
The
an electronic Anti-
Drip sensor. Steam
amount is adjusted
depending
C
the level of the
temperature. If the
temperature is not
high enough you
may not get enough
amount of steam
when you press the
steam trigger (10).

3.7 Shock steam

WARNING: Set the
temperature adjust-
A
ment knob to a posi-
tion where the steam
symbol will be be-
tween the " " range.
1. Fill the water reservoir (see. 3.3).
2. Set the temperature adjustment
knob (3) to steam range by
turning it in the clockwise
direction.
- Thermostat indicator light (11)
will light up.
Steam Iron / User Manual
product has
on
3. When the appliance reaches the
set temperature, thermostat
indicator light (11) will turn off.
4. After the thermostat indicator
light (11) turns off, you can iron
the garments with the powerful
steam by pressing the shock
steam button (9).
WARNING:
this process is main-
A
tained for a pro-
longed time water
may come through
the soleplate (4) to-
gether with steam.
WARNING:
order to use the
A
shock steam feature
the
indicator light (11)
should be turned off.

3.8 Vertical steam

You can also use the shock steam
and continuous steam functions in
the upright position (see 3.6). You
can apply steam to your curtains
and your garments on the hanger
with the steam you will get by
pressing the shock steam button
(7) or the steam trigger (9). Keep
the appliance 15-30 cm away from
the garment and curtains.
If
In
thermostat
11 / 142 EN