Philips HP6522 Mode D'emploi page 13

cleaning the shaving head and the comb
1 Push the shaving head in the direction of the arrows on the back of
the appliance (1) and remove it (2).
2 Remove the shaving foil from the shaving head.
3 Rinse the shaving foil and the inside of the shaving head under the
tap for 5-10 seconds while turning them.
Shake the shaving foil and shaving head irmly.
4
Note: Do not exert any pressure on the shaving foil to avoid damage.
Note: Make sure the shaving foil and shaving head are completely dry before
you reassemble them.
5 Clean the comb with the cleaning brush or under the tap.
Tip: Rub a drop of sewing machine oil onto the shaving foil twice a year.
replacement
If you need to replace a part or want to purchase an additional part, go
to your Philips dealer or visit www.philips.com/shop. If you have problems
obtaining the parts, please contact the Philips Consumer Care Centre in
your country.
shaving head
If you use the shaving head two or more times a week, replace the shaving
unit after around two years or if it is damaged.
EnglisH
13