BOMANN WAA 936 E Notice D'emploi page 21

3.3 - Selecting the clothes load
Beffore putting the clothes into the machine, you should:
Separate the clothes into three lots (cotton, synthetics and wool).
Within each group, separate the coloureds from the whites.
Once the clothes have been sorted, put them into the drum of the machine,
separately according to colour and group, loose piece by piece, as per the
following proportions:
Cotton maximum 5,5 kg.
Synthetics maximum 2,75 kg.
Wool maximum 1 kg.
3.4 - Selecting the right program
Once the clothes have been sorted into fabric types and colours, you need to select
the right program and temperature. SEE PROGRAM TABLE (Section 8).
3.5 - Starting operation
Once the machine has been loaded, the door has been closed and the
compartments of the detergent tray have been filled up, follow this order to get
the machine started:
1st- Turn the On / Off switch to the On position.
2nd- Turn the Programme Selector (P) switch to the STOP position. The Display
(VS) flashes.
3rd- Select the adequate programme with its temperature (see table Sec.8).
4th- Activate the buttons of additional functions chosen (A, En, Pr, T, V, W, Y).
5th- Press the Start button. (St).
The machine gets started automatically and carries out all the operations
predicted in the washing cycle up to the end.
3.6 - How to get the best performance
3.6-1 - Maximise the load (Section 8)
You obtain the most efficient use of energy, water, detergent and time by
using the maximum recommended load.
You save 50% energy by washing one full load instead of two half loads.
3.6-2 - Do you need a pre-wash?
Only for deeply stained laundry !.
You save detergent, water, time and between 5 to 15% of energy through
n o t u s i n g t h e p re - wa s h fo r l i g h t a n d a n o r m a l ly s o i l e d c l o t h e s .
3.6-3 - Do you need hot water?
Soak or treat stains before the wash, in order to reduce to need to use the
hot programme.
You save 50% energy by using the 60ºC programme.
3.6-4 - For washer-dryers: before using the dryer
Select high (> 850 rpm) for the spin before drying, in order to save energy,
water hand time during the drying period.
2 1
8 I