DNT DigiMicro Scale Mode D'emploi page 16

Confi guration
To avoid contamination of the lens, you should put the protection cap back when the device
is not needed.
Main menu
File
Exit:
Options
Preview size:
Rotate
Date/Time:
Language:
Skin:
Toggle Fullscreen:
Preferences:
Capture
Photo:
Video:
As soon as the program is started and the microscope is not connected, an error message
appears
"No Device detected, please connect your Microscope directly to your USB Port."
If your computer has no USB 2.0 interface, the image resolution decreases
Quit the program.
In this menu you can set the preview size.
Here you can rotate the image 90 degrees clockwise or
The date and time is displayed in the image
Sets the language menu
To select a window view.
Switching between normal and screen display. The switch back to normal view is
done with a double click on the image display.
:Here you can make different settings for image display and different effects can be
produced (only VGA resolution and smaller). The settings can be loaded and saved.
The words on the screen are self-explanatory.
Single image
Starts a video recording. Click again to stop recording.
- 16 -