Transportation And Changing Of Installation Position; Before Calling Your After Sales Service - VESTEL VEKF3015 Guide D'utilisation

TRANSPORTATION AND CHANGING OF INSTALLA-
PART 5.

Transportation and changing of installation position

• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package, bands or strong cords and follow
the instructions for transportation on the package for re-transportation.
• Remove
accessories, vegetable bins etc.) or fix
them into the fridge against shocks using
bands during
transportation.
Carry your fridge in the upright position.

BEFORE CALLING YOUR AFTER SALES SERVICE

PART 6.
If your refrigerator is not working properly, it may be a minor problem, therefore check the
following.
The appliance does not operate,
Check if;
• There is a power failure,
• The mains plug is not properly plugged in, or is loose
• The thermostat setting is on position "•",
• The socket is defective. To check this, plug in another appliance that you know which
is working into the same socket.
The appliance performs poorly;
Check if;
• You have overloaded the appliance,
• The doors are not closed perfectly,
• There are not enough ventilation ducts on the kitchen unit as mentioned in the
Installation Manual.
If there is noise;
The cooling gas which circulates in the refrigerator circuit may make a slight noise
(bubbling sound) even when the compressor is not running. Do not worry, this is quite
normal. If these sounds are different check if;
• The appliance is installed firmly as described in the Installation Manual.
• The objects on the appliance are vibrating.
movable parts
re-positioning
TION POSITION
(shelves,
and
EN - 32 -