Haier HA10TG20S Guide De L'utilisateur page 10

3. Remove both left and right front feet from bottom.
4. Loosen the screws holding the bottom hinge
and remove it.
5. Align the holes in the bottom hinge to the corresponding holes on the
opposite side of the cabinet. Insert and tighten the screws. Reinstall both
front feet.
6. To install refrigerator door: Line up the left bottom hole of the
refrigerator compartment door over the bottom hinge pin. Move
door forward to make it straight and align with central hinge.
Install the central hinge again, and turn the hinge axle until it
completely enters the door body. Secure it with the screws provided.
(see fig. 4)
NOTE: Remove plugs from doorframe and install on other side.
doorstopper (left side)
middle pivot pin
7. To install freezer door: Lineup left bottom hole of the door over the
central hinge middle pin. Move door forward to make it straight
and align with freezer compartment. Place over left side the top hinge,
align holes with hole on the refrigerator top and tighten with the
screws provided.
screw holes
fig. # 4
central hinge
English
8