Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Active anode maintenance
Built-in controller
Electric wiring
Protection degree
Touch protection to be applied
It can be connected to electric system supplied with protective earthing as defined in
Regulations on the product:
Storage and transportation requirements
Quality certification
Quality
HAJDU Hajdúsági Industrial Closed Company Limited by Shares (HAJDU Hajdúsági Ipari Zrt) as
manufacturing company hereby certifies that the appliance comply with the technical features described in the
quality certification label.
USAGE AND MAINTENANCE INSTRUCTIONS FOR THE USER
We hope that the appliance fulfils all expectations and provides the best possible service for You
Before using your appliance, please, read this manual carefully and keep it for future reference.
3.1.
First installation
WARNING
!
Putting into operation and first start up of the appliance can only be performed by a technician
according to all related effective regulations or legal requirements or any requirements defined by local
authorities and public health organizations.
If the water heater to be installed does not simply replace an existing appliance but it represents
part of renovation of an existing hydraulic system or a new hydraulic system, the company installing the
water heater shall be obliged to issue a compliance statement for the
buyer, certifying compliance with all effective regulations and specifications after finishing
installation of the appliance. In both cases, the company performing installation has to execute safety and
operation checks on the entire system.
Before starting up the hot water tank, please check that the installing technician has performed all
required operations of installation. Please ensure that You have properly understood the information provided
by the installing technician on how to use the hot water tank and how to perform the operations on the
appliance.
3.2.
Instructions and warranty
The manual is an integrated and indispensable part of the appliance. Do not remove the data label on
the appliance for any reason as these data may be required for any possible future reparations.
Please, read the warranty document related to the appliance carefully. This document contains
specifications regulating warranty.
3.3.
Recommendations
In case of failure and /or defective operation, please do not try to search the error and correct it, rather,
switch the appliance off and turn to our service. In case of reparation, original spare parts are to be used
exclusively, and any type of reparation work can only be performed by a qualified technician. Failure to
consider these recommendations may endanger the safety of the appliance and it invalidates the responsibility
undertaken by the manufacturer.
If the appliance is not used for a longer period, it is recommended to perform the following:
- disconnect the appliance from the electric power system in a way that if there is a switch between the
Table 2.10.-1.
Thank you very much for purchasing our product.
continuously, besides maximum energy saving.
3. USEFUL RECOMMENDATIONS
EN
Anode consumption display
Electric heating and temperature controlling device
Fixed
IPX1
Touch protection class I.
IEC 6036
.
EN 60335-1
EN 60335-2-21
EN 14511-3
IEC 721-3-1 IE12
IEC 721-3-2 IE22
CE indication,
Ist class
13
Publicité
Chapitres
Table des Matières
