Working Procedure; Operation - Trebs Comfortice 21131 Mode D'emploi

■

Working procedure

The procedure has 5 recycling steps as followings: pumping the water—ice making-pulling out the
water—ice cubes drop down—water tray back to normal position. It recycles until the ice cubes is full or
water is lack of.
■

Operation

3. Control panel operation

'START' and 'STOP' button: When the power is connected, the unit will enter the standby status(the
ice selection mode light will flash); when pressing the 'START' button, (the related ice selection light
will turn green), then the unit starts to work. When press the 'STOP' button, the unit will be back to the
status of standby;

'ICE SIZE' button: When pressing the button one time, the ice selection will change accordingly (the
default mode is small mode, from small mode-medium-big);

big size indicator(green): When this light is on, indicating that the unit is making big size ice
cubes and it will adjust the ice making time as well;

medium size indicator(green): When this light is on, indicating that the unit is making medium
size ice cubes and it will adjust the ice making time as well;

small size indicator(green): When this light is on, indicating that the unit is making big small ice
cubes and it will adjust the ice making time as well;

Ice full indicator(red): When the Ice Storage basket is full, the indicator will turn red, the unit
will still working until the next round，then stop. If you need to restart the unit ,press "stop", then press
"start" , the unit will restart.

lack of water indicator(red): The ice maker will automatically check the water volume in the
Water Storage Tank. If the water volume is too low, the red light will be on. the ice maker will stop
working automatically. When adding the appropriate water to the Water Tank , the water low indicator
light will shut-off and the unit will automatically restart.
- 35 -