Kenwood TTM440 Série Mode D'emploi page 3

key
removable warming rack (if
supplied)
lever (with 'Hi-Rise™' for extra lift)
defrost button with indicator light
browning control
cancel button with indicator light
crumb tray
cord storage
to use your toaster
1 Plug the toaster into the power
supply.
2 Turn the browning control until the
desired setting aligns with the line up
mark on the body of the toaster. Use
a lower setting for light toasting and
for thin or dry bread.
3 Insert the bread, muffins, bagels etc.
4 Lower the lever
lever will not stay down unless the
toaster is plugged in). The 'cancel'
button will illuminate.
To toast frozen bread, once the
●
bread is lowered press the 'defrost'
button. The 'defrost' button will
illuminate.
To stop toasting during the cycle,
●
press the 'cancel' button, the toast
will pop up and the 'cancel' button
light will go off.
5 Your toast will pop up
automatically, to raise it higher, lift
the lever.
hints on using your
toaster
Select a lower setting for light
●
browning or for dry bread.
When toasting a single slice of
●
bread, you may notice a variation in
toast colour from one side to the
other - this is normal.
Dry/stale bread toasts more quickly
●
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
For best results ensure that the
●
bread slices are of an even
thickness, freshness and size.
until it locks. (The
In order to achieve uniform browning
●
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.
Model TTM460/TTM470 For
●
best results larger slices of bread are
best positioned long ways in the
slot.
warming rack safety
Never touch hot surfaces
●
especially the metal top area.
1 Never set the browning control
higher than
warming rack.
2 Never completely cover the warming
rack.
3 When using the warming rack, never
wrap the food up. Plastic wrapping
will melt and could catch fire. Foil will
reflect heat, damaging the toaster.
4 If you're using the toaster slots,
always remove the warming rack so
it can't burn you.
to use the warming rack
(if supplied)
1 Place the warming rack on top of
toaster .
2 Put your food on top of the rack
(slicing thick items in half will speed
up the warming process).
3 Set the browning control no higher
than
. Lower the lever.
4 The lever will automatically rise at the
end of the warming cycle. Turn the
items over and repeat the operation.
Watch to make sure they don't burn.
5 To remove the warming rack, allow
the toaster to cool and unplug. Lift
off the warming rack
3
when using the
.