Foppapedretti CARILLON Manuel D'utilisation page 21

G2
a
G1
G
F
click
click
H
click
J1 J2
E
9A. Remove the fixing screws (a).
IMPORTANT: Make sure the locking nut doesn't
protrude from its seat. Insert the leg G1 into the
pivot containing the music device G2 and fix it with
screws and nuts.
IMPORTANT: During the assembly of the pivot
the buttons for unfolding the legs must always be
turned outwards.
9B. Open the 2 driving system parts ( F) and (G)
until a "click".
10. Install the front legs (H) and rear legs (I) by
insert the two legs into the upper part tube. When
the components are assembled correctly, the metal
pins will slot into the holes on the fixture tubes. At
this point you will hear them click into place.
I
11. Install the hanging tubes: Insert the 2 hanging
tubes (J1) and (J2) into the plastic part holes. When
the components are assembled correctly, the metal
pins will slot into the holes on the fixture tubes. At
this point you will hear them click into place.
12. Install the cross support tube: Install the cross
tube (E) by click onto the 2 hanging tubes.
Carillon - 21 EN