Usage; Settings; Using Of Videophone; Setting On The Roadside Panel - Extel WEVP 2200 E Guide D'installation Et D'utilisation

6. USAGE

a. Settings
4 settings can be adjusted
from the side of the monitor :
1- Ringer volume and cut-off
2- Loudsparkers Volume
3- Contrast
4- Brightness
b. Using of videophone
• A call from the outdoor station button triggers the ringer and causes the monitor to light up for about thirty
seconds. Once the visitor has been identified, press on the key to establish communication.
N.B. : Pressing this key just once is enough to establish communication with the outdoor station.
• Once communication is over, either wait for the delay time (about two minutes) or turn the monitor off using
the key.
• To resume communication and bring the image back, press on the then key
• The catch or mechanism is activated using the key.
• To activate the alarm function, press on the key (alarms on the monitor and outdoor station).
c. Setting of the roadside panel
• Setting of the sound level for the speaker of the roadside panel.
In case of a whistle (Larsen effect), adjust the loudspeaker's volume in order to eliminate the trouble.
B A 2 1
+
CFI EXTEL WEVP 2200 E - 11/2011
GB7
http://www.bakonline.net/