Bosch GSR 18V-60 FC Professional Notice Originale page 15

Masquer les pouces Voir aussi pour GSR 18V-60 FC Professional:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
OBJ_BUCH-3249-001.book Page 15 Friday, December 15, 2017 12:04 PM
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
 The battery is supplied partially charged. To ensure full
battery capacity, completely charge the battery in the
battery charger before using for the first time.
 Read the operating instructions of the battery charger.
 Adjust the gear switch only when the machine is at a
complete stop.
 Always push the gear selector and turn the operating
mode selector switch through to the stop. Otherwise,
the machine can become damaged.
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentional actuation of the On/Off switch can
lead to injuries.
 Read the operating instructions of the Bluetooth® Low
Energy Module GCY 30-4.
 Caution! When using the power tool with Bluetooth®,
interference can occur with other devices and equip-
ment, aircraft and medical devices (e.g. pacemakers,
hearing aids). Also, damage to people and animals in
the immediate vicinity cannot be completely excluded.
Do not use the power tool with Bluetooth® near medical
devices, petrol stations, chemical plants, in areas
where there is a danger of explosion and where blast-
ing takes place. Do not use the power tool with Blue-
tooth® in aircraft. Avoid using the product near your
body for extended periods.
 The rapid shut-off feature (Kickback Control) provides
better control over the power tool to increase user pro-
tection compared to power tools that do not have Kick-
back Control. The power tool will switch off if it sudden-
ly and unforeseeably rotates around the drilling axis.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cence.
Bosch Power Tools
Product Description and Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, un-
fold the graphics page for the machine and leave it open.
Intended Use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal and plastic.
The power tool can be used with an angle adapter
(GFA 18-W), angle drill head (GFA 18-WB), eccentric adapt-
er (GFA18-E), drill chuck adapter (GFA 18-B) or metal drill
chuck adapter (GFA 18-M).
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
With the Bluetooth® Low Energy Module GCY 30-4 inserted,
data and settings of the power tool can be transferred be-
tween the power tool and a mobile terminal device by means
of Bluetooth® wireless technology.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Mounting
2 Torque presetting ring
3 Gear selector
4 Cover for Bluetooth® Low Energy Module GCY 30-4
5 Battery pack
6 Battery unlocking button
7 Worklight
8 Rotational direction switch
9 On/Off switch
10 Drill chuck adapter (metal) GFA 18-M*
11 Drill chuck adapter GFA 18-B*
12 Angle driver head GFA 18-W*
13 Eccentric adapter GFA 18-E*
14 Angle drill head GFA 18-WB*
15 Locking ring
16 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
1 609 92A 3Y7 | (15.12.17)
English | 15

Publicité

Table des Matières
loading

Table des Matières