Table des Matières
Publicité
INSTALLATION
Place the incubator on a flat, horizontal, level surface, leaving a space of about 10 cm at the
back and on each sides of the apparatus.
If the chamber is used on top of the shaker, join the two parts with the screws provided.
¡ATENCIÓN! IMPORTANTE PARA SU SEGURIDAD
B
CAUTION! IMPORTANT FOR YOUR SAFETY
Be sure that the voltage supply is the same as the one indicated on the characteristic plate of
the apparatus. Do not use the apparatus if it is NOT earthed. If you have to change the plug
bear in mind the following:
Blue cable: Neutral.
OPERATION
To start up the chamber, press the main switch. The chamber starts at the preset temperature
in the temperature regulator. To set temperature follow temperature control instruction.
16
Brown cable: Phase.
No display during 0,5 sconds
All the displays and LEDS are
illuminated for 2 seconds.
Display of the product software
version for 2.5 seconds.
Yellow/green cable: Earth.
Display of product use time in
hours for 2.5 seconds.
The display indicates that the
unit has been used for 23456.2
hours since its installation.
Display of the product fabrica-
tion date for 2.5 seconds.
Publicité
Table des Matières
