D-Link DAP-2230 Guide D'installation page 3

Quick Installation Guide
This installation guide provides basic
instructions for installing the DAP-2230
Wireless N PoE Access Point on your
network. For additional information about
how to use the Access Point, please see
the datasheet and user manual available on
the D-Link support website.
Minimum System Requirements
- Computer with Windows, Mac OS, or
Linux-based operating system, and an
Ethernet adapter installed
- Internet Explorer 7, Mozilla Firefox 12.0,
Safari 4.0, or Chrome 20.0 or newer
Package Contents
- DAP-2230 Wireless N PoE Access Point
- Wall mounting bracket with mounting kit
- CD-ROM
If any of the above items are missing,
please contact your reseller.
Note: No power adapter supplied. To power
this Access Point, use a D-Link DPE-101GI
PoE Injector or PoE Switch.
Hardware Overview - Top
Power/Status LED
Static Green Ready/Working
Flashing Green Transmitting/Receiving
data
Flashing Red Malfunction during boot
Solid Red Boot failure
Bottom Panel
2 3
1
1 Security Lock
2 Power Receptor (*Note no
longer used, replaced by PoE)
3 LAN (PoE) Port
4 Reset Button
D-Link DAP-2230 Quick Install Guide
4
1