Alarm operation
There are 2 alarms which can be set independently. Also each
alarm can be set to wake you by buzzer or radio. When the alarm
light (alarm 1 or alarm 2 or both) is on, it means the indicated alarm
will active in 24 hours.
How to set buzzer alarm
The radio buzzer beep increases in volume every 15 seconds.
It beeps 1 minute, followed by 1 minute silence and repeat
the cycle. The buzzer will beep for 1 hour, or stop by pressing
the Power button.
The buzzer alarm volume may be adjusted through the Alarm sound
level control button on the bottom of the radio.
1. Press the Alarm 1 (or Alarm 2) button and Alarm 1 time
(or Alarm 2) time will show on the display.
2. Press the SET button, the alarm hour will show on the display.
3. Press up or down button to adjust the hour.
4. Press the SET button again and adjust the minute by pressing up
or down button.
5. Select required days of week on which the alarm will beep by
pressing day of week buttons.
6. Press the SET button again and press up or down button until
the display shows
7. Press the SET button to complete the setting.
* You can press the Alarm 1(or Alarm 2) button anytime to
complete the setting.
9
.