Oase FiltoClear 5000 Notice D'emploi page 44

Cleaning the unit and washing or replacing the foam filters
Wear of the foam filters is caused by mechanical stress and normal ageing.

Insert new foam filters at the start of the season.
Disassembling the foam filter package
Prerequisite:
 The filter cover has been removed. (→ Removing the filter cover)
Place the filter cover upside down on a soft clean surface so that the foam filter package is on
top.
 Undo the two screws, remove the closing disc and remove the first foam filter.
 For every additional foam filter, undo the two spacers and remove the spacer disc and the
foam filter.
44
FCL0023