Oase FiltoClear 5000 Notice D'emploi page 40

Switching the UVC clarifier on/off
 Switching on: Plug the power plug into the outlet.
– The unit switches on immediately.
– The indicator lamp lights up.
– The flow lug on the outlet will show you that water is flowing.
 Switching off: Pull the power plug from the outlet.
Operation
The pressure filter can remain in operation for the full pond season (the filter pump and the UVC
clarifier are switched on).
 The biological filter elements are no longer active at water temperature of less than 10 °C.
 Shut down the unit at water temperatures below 8 °C or at the latest when freezing tempera-
ture are to be expected. (→ Decommissioning/winter storage)
 The UVC lamp is a wear part. Replace the UVC lamp after a specific operating duration to en-
sure optimum filter performance. (→ Replacing the UVC lamp)
Maintenance and cleaning
NOTE
Do not use aggressive cleaning agents or chemical solutions. These agents can damage the
housing, impair the function of the device and harm animals, plants and the environment.
Only clean the unit from the outside with clear water and a soft brush.

40
FCL0015