AEG S63300KDX0 Notice D'utilisation page 24

Masquer les pouces Voir aussi pour S63300KDX0:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

24 www.aeg.com
Temperature colder button
3
OK button
4
Mode button
5
ON/OFF button
6
It is possible to change predefined
sound of buttons to a loudly one by
pressing together Mode button and
Temperature colder button for some
seconds. Change is reversible.
3.1 Display
1
Timer function
1
COOLMATIC function
2
Minute Minder function
3
Child Lock function
4
Alarm indicator
5
Temperature indicator
6
Holiday function
7
3.2 Switching on
To switch on the appliance do these
steps:
Connect the mains plug to the pow-
1.
er socket.
2.
Press the ON/OFF button if the dis-
play is off.
3.
If "dEMo" appears on the display,
the appliance is in demonstration
mode. Refer to "What to do if..."
paragraph.
4.
The temperature indicators show the
set default temperature.
To select a different set temperature re-
fer to "Temperature regulation".
3.3 Switching off
To switch off the appliance do these
steps:
1.
Press the ON/OFF button for 5 sec-
onds.
2.
The display switches off.
7
2
3
4
5
6
3.
To disconnect the appliance from
the power disconnect the mains
plug from the power socket.
3.4 Temperature regulation
The set temperature of the fridge may
be adjusted by pressing the temperature
button.
Set default temperature: +5°C for the
fridge.
The temperature indicator shows the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set tem-
perature remains stored.
3.5 Minute Minder function
The Minute Minder function is to be
used to set an acoustic alarm at the pre-
ferred time, useful for example when a
recipe requires to cool down a mixture
for a certain length of time.
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The Minute Minder indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2.
Press the Timer regulator button to
change the Timer set value from 1 to
90 minutes.
3.
Press the OK button to confirm.
The Minute Minder indicator is
shown.
The Timer start to flash (min).
At the end of the countdown the Minute
Minder indicator flashes and an audible
alarm sounds:
1.
press OK button to switch off the
sound and terminate the function.
It is possible to deactivate the function
at any time during the countdown:
1.
Press the Mode button until the Mi-
nute Minder indicator flashes.
2.
Press the OK button to confirm.
3.
The Minute Minder indicator goes
off.
It is possible to change the time at any
time during the countdown and at the
end by pressing the Temperature colder

Publicité

Table des Matières
loading

Table des Matières