Flush-mounted cabinet
1.
General information
The original operating instructions were drafted in
German.
The operating instructions in other languages were
translated from German.
1.1
Validity of the operating
instructions
These operating instructions are valid for the flush-
mounted cabinets item no. 1344596, 1344598 and
1344599.
1.2
Extent of supply
Please check the delivery for any damages caused
during transit and for completeness.
Extent of supply
• Flush-mounted cabinet for "Regudis W-HTE"
• Fixing material for distributor/collector (only item
no.1344598 and 1344599)
• Fixing material for dwelling station
• Accessories for equipotential bonding
1.3
Contact
Address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
59939 Olsberg
Germany
Technical service
Phone: +49 (0) 29 62 82-234
1.4
Copyright and protective rights
These operating instructions are copyrighted. They
are exclusively designed for persons involved with
the product.
1.5
Used symbols
Important information and further explanations.
Action required
f
•
Enumeration
1.
Fixed order. Steps 1 to X.
2.
Result of action
Z
134459780-V04.04.2019
2.
Safety-related information
2.1
Normative directives
Observe the legal framework conditions valid at the
installation location.
The current standards, rules and guidelines are valid.
2.2
Correct use
Safety in operation is only guaranteed if the product
is used correctly.
The flush-mounted cabinet serves the direct
installation and protection of the dwelling station
"Regudis W-HTE" and its accessories.
Any use of the product outside the above
applications will be considered as non-compliant and
misuse.
Claims of any kind against the manufacturer and/
or his authorised representatives, due to damages
caused by incorrect use cannot be accepted.
The observance of the operating instructions is part
of the compliance terms.
2.3
Modifications to the product
Modifications to the product are not allowed. In
case of modifications to the product, the warranty
will become void. The manufacturer will not accept
liability for damages and malfunctions caused by
modifications to the product.
General information
15