Philips 5000 Série Mode D'emploi page 30

English
30
Problem
The appli­
ance does not
shave as well as
it used to.
The appliance
does not work
when I press the
on/off button.
- For the appliance to be used correctly, the user
should strictly adhere to all instructions included in
the user manual and should abstain from any
actions or uses that are described as undesired or
which are warned against in the user manual.
- These guarantee restrictions do not affect your
statutory rights.
Troubleshooting
This chapter summarises the most common problems
you could encounter with the appliance. If you are
unable to solve the problem with the information
below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer
Care Centre in your country.
Possible cause
The shaving heads are
damaged or worn.
Hairs or dirt obstruct the
shaving heads.
The appliance is still
attached to the power
outlet. For safety reasons,
the appliance can only be
used without cord.
Solution
Replace the shaving heads
(see 'Replacement').
Clean the shaving heads
(see 'Cleaning and
maintenance') by
following steps of the
thorough cleaning
method.
Unplug the appliance and
press the on/off button to
switch on the appliance.