Installation; Wall Mounting - dB Technologies IS Série Manuel D'utilisation

English

3. INSTALLATION

WALL MOUNTING

The IS4T, IS5T and IS6T speakers are designed for wall mounting using the brackets supplied. Proceed as follows:
•
hold the bracket against the wall, mark the centres of the
four holes in the bracket on the wall then drill the four
holes (materials not supplied)
•
fix the bracket to the wall using suitable screws and
anchors (not supplied)
•
align the supplied rubber washers with the two
threaded inserts on the sides of the speaker
•
fasten the speaker to the bracket using the two
screws supplied in the correct position for the required tilt angle
CAUTION!
•
Installation types other than those illustrated here are not allowed.
•
Installation must be carried out by qualified personnel.
•
The fixings used by the installer must be suitable for the type of wall to ensure stability
and safety.
•
Always check that placement is stable and the installation is not a hazard to people,
animals or things.
IS4T-IS5T-IS6T Cod. 420120373 REV. 1.0
17