Product description StretcherSling and StretcherBar
4
StretcherSling features a 180-cm-long fabric sheet
with five lift straps that extend for one side to the other.
This means that the weight of the patient is distributed
over ten straps.
StretcherSling has been designed for use exclusively
with the StretcherBar. No other combinations are
recommended.
StretcherBar is made of aluminium. The mid-section
has a built-in balance regulator and five aluminium
profiles with lift hooks on each end. See manual for
StretcherBar.
The lift hooks are equipped with safety latches and all lift
arms can be adjusted according to the patient's width
by lightly pulling them straight out before starting the lift.
See manual for StretcherBar.
The mid-section of the StretcherBar contains a built-in
balance regulator. This is regulated by rotating a dial on
both sides to achieve the desired balance. See manual
for StretcherBar.
I F U