Manuels Connexes pour Babyletto 4216
Sommaire des Matières pour Babyletto 4216
- Page 1 Item# 4216 Hudson 6-Drawer Double Dresser Assembly Instructions Commode double à 6 tiroirs Hudson Manuel d’assemblage revised 14JUL2020...
- Page 2 Thank you for purchasing a Babyletto nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.babyletto.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly.
- Page 3 ANTI-TIP KIT INSTALACIÓN DEL KIT INSTALLATION DE LA INSTALLATION CONTRA VOLCAMIENTOS TROUSSE ANTI-BASCULEMENT Children have died from furniture tipover. To reduce the risk of furniture tipover, ALWAYS install tip over restraint provided. Han muerto niños al volcarse los muebles. Para reducir el riesgo de que se vuelque un mueble, SIEMPRE instale la sujeción contra volcamientos incluida.
- Page 4 Find your wall material and follow Determine el material de la pared y Trouvez votre propre matériau mural steps to attach the anti-tip kit to your siga los pasos para instalar el kit et suivez les étapes pour fixer la wall.
- Page 5 Fasten strap to back of dresser. Fije la tira en la parte posterior de la cómoda. Fixez la sangle à l’arrière de la commode. Mark spot on wall 1-2” (25-50mm) below the top of the dresser. Marque el punto en la pared a 25-50 mm (1-2 pulgada) debajo de la parte superior de la cómoda.
- Page 6 Fasten strap/bracket by screwing into plastic anchor or wood stud. FIje la tira/el soporte atornillando en la fijación de plástico o el remache de madera. Fixez la sangle/le support par vissage dans l’ancrage de plastique ou le montant en bois. Complete! ¡Listo! C’est terminé!
- Page 7 Finish Terminé READ ALL INSTRUCTIONS BEFORE USING CHANGER TRAY IS NOT INCLUDED, SOLD THE PRODUCT. KEEP THE INSTRUCTIONS SEPARATELY. CHANGER TRAY M0219 OR FOR FUTURE USE. Recheck all screws and M0619 IS RECOMMENDED. bolts to be sure they are fastened securely. Do not overtighten.
- Page 8 ONE YEAR LIMITED WARRANTY: We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request.
- Page 9 Registering your product is even easier than before. You can register your product on our website at : www.babyletto.com/registrations IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT: WWW.BABYLETTO.COM/PARTS OR YOU CAN CONTACT US BY MAIL: BABYLETTO 8700 REX RD., PICO RIVERA, CA 90660...