Introduction; Features; Safety Instructions - Omnitronic P-Series Mode D'emploi

P-series power amplifiers
For your own safety, please read this user manual carefully
All persons involved in the installation, operation and maintenance of this device have to:
- be qualified
- follow the instructions of this manual

INTRODUCTION

Thank you for having chosen an OMNITRONIC power amplifier. If you follow the instructions given in this
manual, we can assure you that you will enjoy this device for many years.
Unpack your amplifier.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.

Features

Powerful amplifier
Enormous power with highest brilliance • 2 gain-controls on the frontpanel • All operation-modes controllable
via LEDs • LED-intensity adjustable via brightness control on the rear panel • Signal-inputs via XLR-female
or 1/4"-jack-socket • Speaker connection via lockable Speakon-plugs or Banana/screw combination • Up to 6
speakers à 8 Ohms can be connected • Ground Lift-switch against humming • Bridged-switch for bridging •
Many protection-circuits for optimized equipment-protection • Very rugged housing • 19" dimensions • High
power/weight-relation

SAFETY INSTRUCTIONS

Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
OPERATING INSTRUCTIONS
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
before you initial start-up.
CAUTION!
CAUTION!
15