Alarms; System Alarms And Messages - Teuco X762 Manuel De L'utilisateur

EN

ALARMS

SYSTEM ALARMS AND MESSAGES

HIGH SALT LEVEL
In case of excessive amount of salt, the power source automatically reduces production
level compared to selected one. The "HIGH SALT" indicator remains on. In this case,
empty the pool partially (e.g. approximately 10%) and add cold water to decrease the
saline concentration. To measure the salt level in a precise manner, it is recommended to
use a portable salinity/temperature measuring tool.
LOW SALT LEVEL
If the salt level in pool water is below the recommended value, the supply source may
not reach the selected output level. The "LOW SALT" indicator remains on. In this case,
measure water saline level and add the necessary salt amount. The type of common salt
(NaCl) indicated for salt electrolysis shouldn't contain any additive (anti-clogging agents,
iodides) and should be suitable for human consumption. The system may show a low salt
level in case of a temperature below 20°C. To measure the salt level in a precise manner,
it is recommended to use a portable salinity/temperature measuring tool.
High salt level
The integrated pH regulator is equipped with two ALARM indicators that lights
up whenever an anomalous value of pH (below 6.5 "LOW" or above 8.5 "HIGH")
and/or of ORP out of range (600 mV "LOW" - 850 mV "HIGH") is detected. When
the regulator detects a pH alarm, a safety stop of the dosing pump (pH) occurs.
38
Livello di sale alto
Low salt level
Livello di sale basso
AUTOMATIC WATER TREATMENT KIT