Maintenance; Cleaning The Electrolyte Cell; Checking The Chlorine Level In The Water - Teuco X762 Manuel De L'utilisateur

MAINTENANCE

CLEANING THE ELECTROLYTE CELL

The electrolyte cell must be kept in excellent condition in order not to adversely affect its
useful lifetime.
If the system is used according to the instructions in this manual and more specifically, if
the balance of the water is maintained within the recommended parameters, it will not be
necessary to clean the electrodes manually.
Contact your nearest Authorized Technical Assistance Centre (see list attached).

CHECKING THE CHLORINE LEVEL IN THE WATER

Analyze the amount of chlorine in the water of the minipool using a control kit.
If the chlorine value for the water in the minipool is too low, increase the ORP value (see
the section entitled "SETTING THE WATER DISINFECTING POWER (ORP)") and/or
select a higher operating level.
If the chlorine value for the water in the minipool is too high, reduce the ORP value (see
the section entitled "SETTING THE WATER DISINFECTING POWER (ORP)") and/
or keep the system operating for less time, choosing one of the filtering programs that
requires a lower system operating time.
If suitable chlorine levels are not found after a period of regular operation, contact your
nearest Authorized Technical Assistance Centre (see list attached).
AUTOMATIC WATER TREATMENT KIT
EN
35